Emboss Moulding Printing Craft

Paint one layer of transparent liquid silicone ink on the back side of fabrics, then use mould printing machine to shape it with high temperature.

After that the emboss effect would show up on the face side.

What Equipments do We Need?

1. Mould Printing Machine

    

    

   

2. Double Stack Mould

   The middle layer has certain space to fill in printing silicone.

3. High Density Mesh and Squeegee

Operation Guide for Normal Fabrics

1. Mould printing silicone add about 3% hardener, and a little silicone thinner for reference.
2. Screen print one time on the back side with above silicone ink.
3. 180-250℃ stamp with mould machine for 10-25 seconds.

Operation Guide for Leather

1. Mould printing silicone add about 3% hardener, and a little silicone thinner for reference.
2. Screen print one time on the back side with above silicone ink.
3. Put the leather on the mould and paint one layer of glue on the mould area, the thickness should be the same as leather’s.
4. 180-250℃ stamp with mould machine for 10-25 seconds.

Announcements

1. Adjust printing silicone’s consistency to avoid ink go through the fabric and pay attention to fastness.
2. Time and temperature for machine set should be on the basis of local environment.